JK62FLS – Front Coil-Over Shocks & Coil Spring Box
JK62FLSB – Front Coil-Over Component Box
Contents: Kit includes Fox 2″ Remote reservoir coil-over shocks with dual coils, all bolt-on mounting brackets, bump stop spacers, quick disconnect sway bar end links, & extended stainless brake lines.
2007 – 2016 Jeep Wrangler JK / JKU
FRONT Bolt-On Coil-Over Kit / 3.5″- 6″ Lift
Fully Bolt-On Coil-Over System with low center of gravity. Fox 2” Remote Reservoir Coil-Over Shocks with 12” of travel & dual springs. Custom spec valving & tuning by Curt LeDuc, Off-Road Hall of Fame racer. Can be used with any long or short arm system. Works with the OE sway bar. Adjustable lift 3.5”- 6”.
Notes: Front lower adjustable control arms are required / not included. (Part # JKLL24F-SX / includes Currie Johnny Joints). Front adjustable track bar is recommended (Part # JKFTA717) or the OE track bar must be relocated (not included). An aftermarket driveshaft is required (not included). The recommended wheel back spacing is 4.5″ or less.
JK62RLS – Rear Coil-Over Shocks & Coil Spring Box
JK42RLSB – Rear Coil-Over Component Box
Contents: Kit includes Fox 2″ Piggyback reservoir coil-over shocks with dual coils, all bolt-on mounting brackets, rear track bar relocation bracket, bump stop spacers, sway bar end links, & extended stainless brake lines.
2007 – 2016 Jeep Wrangler JK / JKU
REAR Bolt-On Coil-Over Kit / 3.5″- 4.5″ Lift
Fully Bolt-On Coil-Over System with low center of gravity. Fox 2” Piggyback Reservoir Coil-Over Shocks with 10” of travel & dual springs. Custom spec valving & tuning by Curt LeDuc, Off-Road Hall of Fame racer. Can be used with any long or short arm system. Works with the OE sway bar & exhaust. Adjustable lift 3.5”- 4.5”.
Notes: Front lower adjustable control arms are required / not included. (Part # JKLL24F-SX / includes Currie Johnny Joints). Front adjustable track bar is recommended (Part # JKFTA717) or the OE track bar must be relocated (not included). An aftermarket driveshaft is required (not included). The recommended wheel back spacing is 4.5″ or less.
JK62RLS – Rear Coil-Over Shocks & Coil Spring Box
JK62RLSB – Rear Coil-Over Component Box
Contents: Kit includes Fox 2″ Piggyback reservoir coil-over shocks with dual coils, all bolt-on mounting brackets, rear track bar relocation bracket, bump stop spacers, sway bar end links, & extended stainless brake lines.
2007 – 2016 Jeep Wrangler JK / JKU
REAR Bolt-On Coil-Over Kit / 4.5″- 6″ Lift (High Clearance Design)
Fully Bolt-On Coil-Over System with low center of gravity. Fox 2” Piggyback Reservoir Coil-Over Shocks with 10” of travel & dual springs. Custom spec valving & tuning by Curt LeDuc, Off-Road Hall of Fame racer. Can be used with any long or short arm system. Works with the OE sway bar & exhaust. Adjustable lift 4.5”- 6”.
Notes: On 2 door models, a rear aftermarket driveshaft is required (not included). Rear upper adjustable control arms are required / not included (Part # JKULR26-SX). On 4 door models, a rear aftermarket driveshaft is recommended (not included). Rear lower adjustable control arms are recommended / not required (Part # JKLL24R-SX includes Currie Johnny Joints). The recommended wheel back spacing is 4.5″ or less.
JKLSAB – Front Air Bump Stop Kit
Contents: Kit includes front Fox air bump stops, front air bump stop brackets, & front bump stop spacers.
2007 – 2016 Jeep Wrangler JK / JKU
FRONT Air Bump Stop Kit
Bolt-on kit to eliminate the OE bump stops with Fox air bump stops. No Welding & minimal cutting required.
Note: Sold as an upgrade to replace the OE front bump stops when used with Skyjacker’s front coil-over kit.
2007 – 2016 Jeep Wrangler JK / JKU
(Recommended / Required Components)
JKFTBA717 – Front Adjustable Track Bar 0″- 4″ (For 5″- 6″ lift, add a track bar relocation bracket Part # JKFTB)
JKLL24F-SX – Front Lower Adjustable Control Arms with Currie Johnny Joints (Short Arms)
JKLL24R-SX – Rear Lower Adjustable Control Arms with Currie Johnny Joints (Short Arms)
JKULR26-SX – Rear Upper Adjustable Control Arms
JKRTBA717 – Rear Adjustable Track Bar 0″- 4″ (For 5″- 6″ lift add a track bar relocation bracket Part # JK24RTB)