$2,131.55Select options

JK62FLS – Front Coil-Over Shocks & Coil Spring Box

JK62FLSB – Front Coil-Over Component Box

Contents: Kit includes Fox 2″ Remote reservoir coil-over shocks with dual coils, all bolt-on mounting brackets, bump stop spacers, quick disconnect sway bar end links, & extended stainless brake lines.

2007 – 2016 Jeep Wrangler JK / JKU

FRONT Bolt-On Coil-Over Kit / 3.5″- 6″ Lift

Fully Bolt-On Coil-Over System with low center of gravity. Fox 2” Remote Reservoir Coil-Over Shocks with 12” of travel & dual springs. Custom spec valving & tuning by Curt LeDuc, Off-Road Hall of Fame racer. Can be used with any long or short arm system. Works with the OE sway bar. Adjustable lift 3.5”- 6”.
Notes: Front lower adjustable control arms are required / not included. (Part # JKLL24F-SX / includes Currie Johnny Joints). Front adjustable track bar is recommended (Part # JKFTA717) or the OE track bar must be relocated (not included). An aftermarket driveshaft is required (not included). The recommended wheel back spacing is 4.5″ or less. 

$2,260.68Select options

JK62RLS – Rear Coil-Over Shocks & Coil Spring Box

JK42RLSB – Rear Coil-Over Component Box

Contents: Kit includes Fox 2″ Piggyback reservoir coil-over shocks with dual coils, all bolt-on mounting brackets, rear track bar relocation bracket, bump stop spacers, sway bar end links, & extended stainless brake lines.

2007 – 2016 Jeep Wrangler JK / JKU

REAR Bolt-On Coil-Over Kit / 3.5″- 4.5″ Lift

Fully Bolt-On Coil-Over System with low center of gravity. Fox 2” Piggyback Reservoir Coil-Over Shocks with 10” of travel & dual springs. Custom spec valving & tuning by Curt LeDuc, Off-Road Hall of Fame racer. Can be used with any long or short arm system. Works with the OE sway bar & exhaust. Adjustable lift 3.5”- 4.5”.
Notes: Front lower adjustable control arms are required / not included. (Part # JKLL24F-SX / includes Currie Johnny Joints). Front adjustable track bar is recommended (Part # JKFTA717) or the OE track bar must be relocated (not included). An aftermarket driveshaft is required (not included). The recommended wheel back spacing is 4.5″ or less. 

$2,260.68Select options

JK62RLS – Rear Coil-Over Shocks & Coil Spring Box

JK62RLSB – Rear Coil-Over Component Box

Contents: Kit includes Fox 2″ Piggyback reservoir coil-over shocks with dual coils, all bolt-on mounting brackets, rear track bar relocation bracket, bump stop spacers, sway bar end links, & extended stainless brake lines.

2007 – 2016 Jeep Wrangler JK / JKU

REAR Bolt-On Coil-Over Kit / 4.5″- 6″ Lift (High Clearance Design)

Fully Bolt-On Coil-Over System with low center of gravity. Fox 2” Piggyback Reservoir Coil-Over Shocks with 10” of travel & dual springs. Custom spec valving & tuning by Curt LeDuc, Off-Road Hall of Fame racer. Can be used with any long or short arm system. Works with the OE sway bar & exhaust. Adjustable lift 4.5”- 6”.
Notes: On 2 door models, a rear aftermarket driveshaft is required (not included). Rear upper adjustable control arms are required / not included (Part # JKULR26-SX). On 4 door models, a rear aftermarket driveshaft is recommended (not included). Rear lower adjustable control arms are recommended / not required (Part # JKLL24R-SX includes Currie Johnny Joints). The recommended wheel back spacing is 4.5″ or less.

$803.56Add to cart

JKLSAB – Front Air Bump Stop Kit
Contents: Kit includes front Fox air bump stops, front air bump stop brackets, & front bump stop spacers.

2007 – 2016 Jeep Wrangler JK / JKU

FRONT Air Bump Stop Kit

Bolt-on kit to eliminate the OE bump stops with Fox air bump stops. No Welding & minimal cutting required.
Note: Sold as an upgrade to replace the OE front bump stops when used with Skyjacker’s front coil-over kit.

2007 – 2016 Jeep Wrangler JK / JKU

(Recommended / Required Components)

JKFTBA717 – Front Adjustable Track Bar 0″- 4″ (For 5″- 6″ lift, add a track bar relocation bracket Part # JKFTB)

JKLL24F-SX – Front Lower Adjustable Control Arms with Currie Johnny Joints (Short Arms)

JKLL24R-SX – Rear Lower Adjustable Control Arms with Currie Johnny Joints (Short Arms)

JKULR26-SX – Rear Upper Adjustable Control Arms

JKRTBA717 – Rear Adjustable Track Bar  0″- 4″ (For 5″- 6″ lift add a track bar relocation bracket Part # JK24RTB)

SUSPENSION

Lift Kits
Leveling Kits
Coil Springs
Leaf Springs
Add a leafs
Fitted Leafs
Sway Bar End Links

SHOCKS & STRUTS

Shocks
Struts

DRIVE LINE

Drive Shafts
Carrier Bearing Lowering Kits
Transfer Case Lowering Kits

STEERING

Stabilizers
Pitman Arms
Steering Arms

ACCESSORIES

Brake Lines
Skid Plate
Spare Tire Relocation
Tailgate Saver
About Us
Contact Us
Orders Over $99

Free Shipping to the lower 48

Returns & Exchanges

60 Days

Warranty Info

Limited Lifetime Warranty

Downloads

Installation Instructions
Master Catalog

Tech Videos

Technical Information about various Skyjacker® parts

GM Control Arm Variations

How to identify the different 14-18 GM factory control arm variations

FMVSS Testing

Proven Compliant with FMVSS 126 Safety Standards

Your Account

Create or login to your account to enjoy discounts and rewards.

0
    0
    Your Cart
    Your cart is empty
      Calculate Shipping
      Apply Coupon