G351RKMLTD – 3.5 in. Front / 2 in. Rear Dual Rate Long Travel Coil Spring Lift Kit with M95 Monotube Shocks (Jeep JT Rubicon DIESEL)
Jeep Gladiator JT Rubicon Diesel Models
Suspension Lift Kit With 3.5 in. Front and 2 in. Rear Dual Rate Long Travel Coil Springs, Front Lower Control Arms, Front Adjustable Track Bar, Bump Stop Spacers, Sway Bar End Links, M95 Monotube Shocks.
Will Not Fit Gas Models.
Will Not Fit Mojave Models.
Starting At: From: Original price was: $1,444.25.$1,299.83Current price is: $1,299.83.
California Residents
WARNING: Cancer and/or other Reproductive Harm. www.p65warnings.ca.gov
UPC | 803696268071 |
---|---|
Lift Height | 3.5 in. |
Max Tire Size | 37×12.50 |
Wheel | 17-20 x 9 |
Backspacing | 4.5 |
Kit Note | Will Not Fit Diesel Models. Will Not Fit Mojave Models. |
Skyjacker specifically engineered a progressive 2-stage dual rate long travel coil. The 1st Flex Rate stage delivers a comfortable ride with the ability to flex for increased articulation.
The flex rate expands during full articulation as the suspension drops (full droop). This keeps the coil springs seated in the upper coil mount/bucket and the tires in contact with the terrain. The 2nd Ride Rate stage only engages after compression past the flex rate.
Engineered to coordinate with the Gladiator's distinctive suspension handling characteristics, the rear coils are side specific.
Longer replacement Front Lower Control Link Arms corrects caster angle. The inward offset bend improves tire clearance to maximize turning radius. Longer replacement Rear Upper Control Link Arms correct rear drive shaft pinion angle.
Formed from 2-inch OD x 0.250 wall DOM tubing, both pairs of arms have pressed-in HD OEM style vulcanized rubber bushings at each end.
A replacement Front Adjustable Track Bar includes pressed-in HD OEM style rubber bushing and an adjustable 3/4-inch Heavy-Duty Rod End, Jam Nut and Alignment Bushings.
Front and Rear Bump Stop Spacers bolt onto the axle bump pads and keep the suspension travel safely in check. Extended Length Sway Bar End Links allow full articulation at full droop. The front end links include Skyjacker installed pressed-in HD OEM style rubber bushings. The rear end links come with press-in Poly bushings.
Will Not Fit Gas Models.
Will Not Fit Mojave Models.
Only logged in customers who have purchased this product may leave a review.
Year | Make | Model | Fitment Info |
---|---|---|---|
2023 | Jeep | Gladiator (JT) - Rubicon 4WD DIESEL |
|
2022 | Jeep | Gladiator (JT) - Rubicon 4WD DIESEL |
|
2021 | Jeep | Gladiator (JT) - Rubicon 4WD DIESEL |
|
Reviews
There are no reviews yet.